45M Truck-mounted Concrete Pump-SY5400THB-45
Product Details:
| Place of Origin | China (Mainland) |
|---|---|
| Brand Name | SANY |
| Model Number | SY5400THB-45 |
Payment & Shipping Terms:
| Payment Terms: | L/C,T/T |
|---|
Detailed Product Description
Automatic control of engines rotary speed for energy saving;
Open-type hydraulic system with the fully hydraulic steering, the electrohydraulic cushion, and the differential pressure response, which provides high reliability and slight steering shocking;
The pumping volume reaches 140m3/h, and the stepless control is adopted to meet various working conditions;
Automatic retraction of concrete piston, which facilitates the checking and the replacing;
The text display is adopted to show the operation parameters and the fault types. Also the multiple automatic protection system is equipped.
| Working Conditions | |
| Height Above Sea Level | ≤1000m |
| Environment Temperature | 0°40°C |
| Complete Vehicle Parameters | |
| Dead Weight | 40×10^3kg |
| Max.Pay Mass | 41×10^3kg |
| Max.Speed | ≤80km/h |
| Overall DimensionLength × Width × Height | 12590 mm×2500 mm×3990 mm |
| Engine System | |
| Engine Type (Number of cylinder/Alignment/Fuel) | V6turbo surcharge intercooling, automatic diesel engine |
| Engine Model | OM501LA |
| Output Power | 290kW/1800rpm |
| Discharge Capacity | 11.946 L |
| Max.Torque/Rev | 1850Nm/1080rpm |
| Tail Gas Discharge Standard | Euro |
| Capacity of Fuel Tank | 400L(with oil-water separator) |
| Chassis Parameters | |
| Origin/Manufacturer/Model | Germany/DaimlerChrysler automobile invest Ltd/actros4140 |
| Chassis Drive Model | 8×4 |
| Power Take-off Model | |
| First Wheel Base | 1700+4600 mm |
| Second Wheel Base | 1350 mm |
| Track Front | 2045 mm |
| Track Rear | 1804 mm |
| Tyre Type | 315/80R22.5 |
| Rim Type | 9.00v×22.5t |
| Arm support | |
| Type | Five-section, folding, full hydraulic |
| Diameter of delivery pipe | DN125 |
| Length of end hose | 3m |
| Length of First section | 9080 mm |
| Turning angle of First section | 92° |
| Length of Second section | 8000 mm |
| Turning angle of Second section | 180° |
| Length of Third section | 8000 mm |
| Turning angle of Third section | 180° |
| Length of Fourth section | 7900 mm |
| Turning angle of Fourth section | 180° |
| Length of Fifth section | 7880 mm |
| Turning angle of Fifth section | 254° |
| Turning angle of revolving table | 365° |
| Horizontal length of arm support | 40.83 m |
| Vertical length of arm support | 44.75 m |
| Lubricating mode | Lubrication with hydraulic oil at lubrication center |
| Oil tank capacity | 800 L |
| Control | Manual/remote |
| Max. water pressure of water pump | 2 MPa |
| Water tank capacity | 600 L |
| Cooling method of hydraulic oil | Wind cooling |
| Pumping system | |
| Drive mode | Hydraulic type |
| Oil cylinder bore X stroke | Φ160 ×2200 mm |
| Delivery cylinder bore X stroke | Φ260 ×2200 mm |
| Type of valve | S valve |
| Theoretical displacement of concrete | Low pressure 140 m3/h |
| Theoretical displacement of concrete | High pressure 100m3/h |
| Theoretical pumping pressure | High pressure 12 MPa |
| Theoretical pumping pressure | Low pressure 8.5 MPa |
| Theoretical pumping frequency | High pressure 13 times/per minute |
| Theoretical pumping frequency | Low pressure 21 times/per minute |
| High pressure pumping | |
| Theoretical horizontal distance | 850m/125A pipe |
| Theoretical vertical distance | 200m/125A pipe |
| Hopper capacity | 0.9 m^3 |
| Material feeding height | 1.4 m |
| Oil pressure of the system | 32.5 MPa |
| Slump | 14 cm~23 cm |
| Max. aggregate size | 40 mm |
| High-low pressure switch-over | Automatic switch-over |
45M Truck-mounted Concrete Pump-SY5400THB-45
Other Products from this Supplier
See more
Truck-mounted Concrete Pump, concrete pump, truck concrete pump products from this supplier.
Product Showcase[30]
Products
- Harbor Machinery [1]
- Hoisting Machinery [1]
- Pile Driving Machinery [2]
- Coal machinery [2]
- Concrete Machinery [13]
- Road Construction Machinery [10]
- Others [15]
Company Info
SANY Heavy Industry Co., Ltd.
[China (Mainland)]
[Verified Member]
City: Changsha
Province/State: Hunan
Country/Region : China (Mainland)
Business Type:Manufacturer
Online Postings: Products